A water loss generates more records than any other restoration job. The software you choose decides whether those records exist, whether they are tied to the right room and day, and whether an adjuster can read them six months later. This guide covers what to look for, what the drying standard requires, how pricing models differ, and how to test a product on a real job.

What the software must do in the field

The field app is the product. If a technician cannot record the job while standing in it, the office rebuilds it from memory and text messages. Check each of these on a phone, in a basement, first.

  • Photos tied to a room and a date. Every photo carries the job, the room, the time and the person, and uploads at full resolution.
  • Moisture readings by material and location. Material, location, meter type and date, logged against a dry standard so the reading can show a trend.
  • Psychrometric readings. Temperature and relative humidity at the required points, with the humidity ratio computed.
  • Floor plans with measurements. A plan to scale gives the affected area and room volume the equipment math needs; ask whether it is measured by the device or sketched.
  • Time on site. Clock-in and clock-out per job, verified against the job address, so payroll and the invoice share one record.
  • Sign-offs. Work authorization, change orders and completion certificates signed on the phone.
  • Offline work. The app must capture everything with no signal and sync later without duplicating or dropping a write.

Encircle is a field documentation product often paired with a separate job-management system, and magicplan is a floor-plan and reporting tool rather than a job-management platform. That means two logins, two bills and a reconciliation step. The comparison page sets the main products side by side.

What it must do in the office

The office side turns field records into money and proof. Look for one job record that the schedule, estimate, invoice and report all read from.

  • Scheduling and dispatch. Assign crews and equipment by day and move a job without re-entering it.
  • Estimates. Line items that read the measured areas from the floor plan, with an export to the platform your adjusters use.
  • Invoices. Built from the job, with the drying log and photos attached when the carrier asks.
  • Payroll time. Clock events exported to payroll with the job they belong to, so labor cost per job is real.
  • Reports. A carrier-ready report with the psychrometric log, moisture trends, equipment record and photos, generated from the data.
  • Portals. An adjuster or customer sees the documentation through a link scoped to one job, without a login.
  • Accounting sync. Invoices and payments reach your accounting system without re-keying.

The drying standard is the test

Water mitigation has a written standard that carriers and courts refer to: ANSI/IICRC S500, the Standard for Professional Water Damage Restoration. The 2021 edition is current. Software does not make a job compliant, but it decides whether you can show compliance afterwards.

Equipment math

S500 sizes initial dehumidification from the cubic footage of the affected area and the class of water intrusion, with separate factors by dehumidifier type. Air movers are placed from the affected floor and wall surfaces. The software should compute an initial placement from the measured room and the class you assign, show its working, and let you override it. A product that suggests equipment without a room volume is guessing. The arithmetic is in how many air movers and dehumidifiers S500 calls for.

Daily readings

The standard expects monitoring at least once a day, with psychrometric readings at the points that describe the drying system: the affected area, an unaffected area, outside and the dehumidifier outlet. The software should prompt for due readings and flag a job that has missed a day. AIFSOP, for example, logs readings by room, material and date, and an overdue reading raises a risk alert on the dashboard.

Drying goals

A drying goal is set per material against a dry standard: readings from the same material in an unaffected area of the same building. The software should keep the dry standard, the goal and each day's reading side by side, and mark the material dry only when the goal is met. Ask to see one material's trend across five days; if the product cannot draw it, it cannot defend the invoice.

Pricing models: per user or per location

Restoration software is priced three ways, and the model decides what grows with your headcount.

  • Per user. Every login costs the same, so each technician you hire adds to the bill. Albi, for example, lists $60 per user per month.
  • Per company, quoted. Pricing on request after a sales call. DASH, for example, is quoted per company and public listings disagree on the figure.
  • Per location. A flat price per branch, with office seats included and field users free. Field headcount does not change the bill; opening a branch does.

AIFSOP uses the third model: one Location plan at $149 per location per month, or $119 per month billed annually, with three office seats included, $29 per month for each extra office seat, and technicians unlimited and free. The 30-day trial needs no card, and there is no setup fee. See the pricing page.

Whatever the model, settle three things before the trial: which roles count as a paid seat; whether the trial needs a card, since a trial that charges on day 31 is a different offer from one that pauses; and whether there is a setup fee or a minimum term.

Data ownership and export

You will change software again. Buy on the assumption that you will leave.

  • Ownership in the contract. The job records, photos, readings and documents are yours, and the terms say so.
  • Export in open formats. Jobs and readings as CSV, documents as PDF, photos as original files with timestamps, available to an administrator without a support ticket.
  • Export after cancellation. How long the data stays available after you stop paying, and whether the account can be reactivated intact.
  • An API or integration path. Accounting sync at minimum; an API for anything else.

Native iOS or cross-platform

The field app is where native matters. Measured floor plans need the phone's depth sensor and the operating system's scanning frameworks, which a native app reaches directly and a web view does not. Offline capture, background location and large photo uploads also behave better natively. Cross-platform frameworks can do good work, so test the behavior, not the label: put the phone in airplane mode, log ten photos and six readings, and see what arrives. An iOS-only app is a constraint if half the crew is on Android; an app that runs everywhere but measures nothing is a constraint of another kind.

What AI should and should not do

Judge AI by what it reads and what it is allowed to write.

It should

  • Draft the daily plan from the open jobs, the crew and the readings due, for a manager to approve.
  • Suggest equipment from the room volume, the class and the current readings, with the inputs visible.
  • Flag a drying stall, an overdue reading or a documentation gap.
  • Draft the insurance report and the executive summary from the job's own data.

It should not

  • Invent a reading, a photo or a date. An empty field stays empty.
  • Mark a material dry, close a task or sign a document.
  • Act on a recommendation without a person approving it.
  • Train on your job data or send it to a third party without saying so in writing.

Ask where the model runs and what it is given. AIFSOP, for example, runs its planning, equipment and reporting models server-side on the job data, with every output reviewable before anyone acts on it.

Security and multi-tenant isolation

Every cloud product keeps your jobs in the same database as other contractors'. The question is how the separation is enforced.

  • Row-level isolation in the database. Access rules enforced by the database for each organization, not only by application code.
  • Roles with limits. Owners, managers, estimators and technicians see different things; a technician cannot export the customer list.
  • Audit trail. Who changed which record and when.
  • Portal scope. An adjuster link shows one job, expires, and cannot be walked to the next job.
  • Encryption and backups. In transit and at rest, with backups the vendor can show being restored and a named hosting location.
  • Sign-in controls. A second factor for office roles, and one step to remove a departed employee's access, including on the phone.

A scoring table

Score each product on the same sheet. The weights suit a company whose revenue is mostly water work; move points to estimating or reconstruction if that is your mix. Score 0 to 5 per row and multiply by the weight.

Scoring sheet for water damage restoration software (weights total 100)
CriterionWeightWhat earns a 5
Field capture offline20Photos, readings, time and sign-offs captured offline and synced once
Drying log against S50015Dry standards, goals, daily readings, equipment math from measured volume, missed-day alerts
Office workflow15Schedule, estimate, invoice, payroll and report read one job record
Floor plans10Measured on the device; area and volume feed estimate and equipment
Portals and reporting10Carrier-ready report from the data; portal links scoped to one job
Pricing model10Predictable as the crew grows; no setup fee; trial without a card
Data ownership and export10Open-format export by an administrator, during and after the subscription
Security and isolation5Database-enforced isolation, roles, audit trail, documented hosting
AI boundaries5Drafts and flags from job data, reviewable, never invents or signs

Twelve questions to ask a vendor

  1. Which edition of S500 do your equipment calculations follow, and can I see the inputs behind a recommendation?
  2. Show me a moisture trend for one material over five days on a real job.
  3. What happens to ten photos and six readings logged in airplane mode when the signal returns?
  4. Are floor plans measured by the device or drawn, and does the area feed the estimate?
  5. Which roles count as a paid seat, and what does a new technician cost?
  6. Does the trial need a card, and what happens the day it ends?
  7. Is there a setup fee, a minimum term or a notice period?
  8. How do I export every job, photo, reading and document, and for how long after I cancel?
  9. Is one organization's data kept from another's in the database or in the application?
  10. What does the AI read, where does it run, and is my data used to train it?
  11. How does an adjuster see a job, and what else can that link reach?
  12. How fast can I remove a departed employee's access, including on the phone?

A 30-day trial plan with one real job

Demos show the product on the vendor's data; a trial should show it on yours. Pick one real water job that starts in the first week and run it entirely in the product.

  1. Days 1 to 3: set up. Create the organization, roles and crew; invite one technician, one manager and whoever invoices; type in ten past jobs.
  2. Days 4 to 7: the first visit. Measure or scan the affected rooms, take the dry standard, record the category and class, photograph every room, place equipment from the suggestion and record what you set. Clock in on site.
  3. Days 8 to 14: the drying days. Log psychrometric and moisture readings every day from the phone, at least once with no signal, and see whether the product flags the day you skip.
  4. Days 15 to 18: the close. Reach the drying goals, pick up the equipment, get the completion sign-off on the phone, generate the carrier report and send the adjuster the portal link.
  5. Days 19 to 24: the money. Build the estimate from the measured areas, invoice from the job, export clock events to payroll and push the invoice to accounting, then compare the invoice's labor hours with the clock record.
  6. Days 25 to 30: leave. Export everything, open the files, remove the technician's access and confirm it took effect on the phone. Then score the sheet.

Deciding

Add up the sheet, but read the trial notes first. The product that scored highest and lost a reading in the basement is not the one to buy. Choose the one whose records you would hand to an adjuster unchecked, whose bill you can predict a year out, and whose export you have already opened.